R60 Usb To Can Interface Driver
This auction is pick up only from Marrickville, NSW These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only ALL ASSETS IN THIS AUCTION ARE SOLD AS IS Invoice totals exceeding $5000 must be paid by direct deposit A Buyers Premium of 7.5%, 13.5% or 20% + GST applies to all lots purchased in this auction. (Refer to each Lot) By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale. BUYER'S PLEASE NOTE:.
Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding. Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only.
If you are unsure do not bid as no refunds will be given. Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
R60 USB to CAN interface d&b audiotechnik GmbH 1. R60 USB to CAN interface This manual describes the facilities and functions of the hardware and the installation of the necessary software (driver) of the R60 USB to CAN interface. A detailed description of the d&b Remote network (CAN-Bus) is given in.
Items must be inspected before removal from site as refunds or exchange are not given under any circumstances. Collections are not allowed outside of the dates/times specified.
Custom Made Road Case, Road Ready with Lift-off Lid. Size approx 530 x 420 x 230 mm (H). Custom Made Road Case with Lift-off Lid. Size approx 530 x 420 x 230 mm (H). Custom Made Road Cases with Lift-off Lid. Custom Made Road Case, Castor Wheels, Compartments to hold 2 x Lights.
Size approx 710 x 400 x 800 mm (H) plus Wheels. Professional Road Case, Encore brand with Front and Back Lids. Road Cases - (suitable for 50 inch Plasma Screen), Top Lift-off Lid, Cast Wheel Base. Size approx 1350 x 390 x 860 mm (H) plus Wheels. Road Cases, Top Lift Off Lid, Various sizes.
Road Case, Top Hinged Lid, Size approx 520 x 480 x 210 mm (H). Road Case, Top Hinged Lid, Colour Silver. Size approx 640 x 450 x 290 mm (H).
Road Case with Hinged Lid and Castor Wheels. Size approx 890 x 490 x 650 mm (H) plus Wheels.
Road Case with Hinged Lid, Size approx 500 x 390 x 190 mm (H). Road Case, Hinged Top Lid, Size approx 520 x 480 x 210 mm (H). Rackmount Equipment Road Cases, 4 RU, Various sizes. Rackmount Road Case - Front and Back Lids, 2 RU Size approx 520 x 340 x 220 mm (H). Mini-drive model FDS-336 Loud Speaker Management System.
Martin Blackline F10 10 Inch Passive 2 Way Speakers. JBL EON 10G2 Powered Speaker. Mipro Wireless Public Address Speaker model MA-707. Mipro Extension Passive Speakers, model MA707EXP. Panasonic model TY-SP50P8W-K to suit 50 inch Plasma Screen. NL8 Speaker Extension Barrels and 2 x NL8 to NL4 Speakon Adapters.
Speaker Leads, 4 Core Speakon to Speakon. Speaker Cables - NL8. Gator Frameworks model GFW-SPK-2000SET with Height adjustable Mast, Tripod Base. Klotz 32/8 Multicore Cable. Microphone Cables, XLR to XLR, Length approx 10 metres. Audio Patch Cables, Various types and lengths.
Assorted Audio Cables, with 6.5 TBS connectors, various lengths and types. Multicore Cables, 24 Way Multicore Cable with Stage Box and Tails, XLR Connectors, Length approx 40 Metres.
Metal Stand, Holder size 740 x 380 mm on adjustable height support base. Microphone Stand - Mic Stand with Boom Arm. Follow Spot Light - Robert Juliat model `Cricket` 1000 / 1200 Watts. Qty approx 40 x assorted Gel Caps, Various Colours. Rackmount Component Box - Ply Timber, no ends.
Rackmount Equipment Case - Ply Timber, No ends, Size approx 520 x 550 x 250 mm. Qty 3 x Mirror Balls - approx 200 mm Dia. Mirror Ball - approx 300 mm Dia. Canvas Carry Bag (suitable to hold 2 x 50 inch Plasma screen Speakers, Red Canvas. Qty (approx 65) Remote Controls - Brands include Panasonic, Sony, Kodak, Pioneer, Fujitsu, Phoenix etc. And many more. This Sale is GST Exclusive This Sale has a Variable Buyers Premium where the percentage of buyer’s premium will change once a bid price of $1000 or more is reached.
A 20% Buyer’s Premium applies when the bidding is less than $1000, moving to 13.5% buyer’s premium once the bidding reaches $1000 or more. The Buyer’s Premium will be added to your final bid price. For example: Successful Bid Price is $100 + 20% Buyers Premium = $120 +10% GST = Invoice Total of $132.00 Successful Bid Price is $1000 + 13.5% Buyers Premium = $1135 +10% GST = Invoice Total of $1248.50 Successful Bid Price is $10000 + 7.5% Buyers Premium = $10750 +10% GST = Invoice Total of $11825.00 Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them.
These should be taken as a guide only. Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Contact for an exact invoice total.
Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split. GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website. Any payment enquiries, please email Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item.
Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned. Vehicle Product Warranty Where applicable, and subject to manufacturers terms and conditions, the balance of new car warranty will apply to these vehicles. No other warranties apply. There is no warranty under the Motor Dealers and Repairers Act 2013; Section 57 in respect of vehicles sold by auction.
The dealer is not required to repair or make good any defect which may exist or occur in this vehicle sold at auction. Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the 'Refresh Period'. There is no limit to the number of times an online auction can be extended.
This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often. DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY. Pick up date/time:.
Wednesday 28th Oct 2015 between 9:00am & 3:00pm. Thursday 29th Oct 2015 between 9:00am & 3:00pm.
Location:. Assets located at 5 Saywell Street, Marrickville NSW To collect your purchases please attend the collection address during the times advised with a copy of your winner's e-mail and photo ID.
If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner's e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party. Please Note:.
Children under the age of 15 will not be permitted on sites. All persons visiting site must be wearing fully enclosed shoes, preferably safety boots. Packaging and collection of assets is the responsibility of the purchaser.
Delivery is not available for this auction. Any items not collected after the nominated collection times may be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
Items must be inspected before removal from site as refunds or exchange are not given under any circumstances. Should you have a carrier collect on your behalf, please ensure they inspect on your behalf before removing the assets from the site as refunds or exchange are not given under any circumstances.
GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:. Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports). Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts. Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.
Please note:. Persons under the age of 15 years will not be permitted onsite.
R60 Usb To Can Interface Driver Work
Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site. Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site. It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives. Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
R60 Usb To Can Interface Driver Make
All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment. Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
Usb To Can Interface
The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres. Enclosed footwear must be worn onsite – Safety boots may be required at industrial sites.